COFFEE MACHINE SERVICING FROM TA MOKO ESPRESSO


From our offices in Wilton we sell, service, maintain and repair most makes of commercial espresso coffee machines and tea brewing equipment specialising in traditional espresso coffee machines and water boilers. Below is a list of the main makes of machines we look after however this list is not exhausted and if your machine needs repair and is not listed please get in touch.

Some of the Machines we work on include :

Astoria / CMA, Azkoyen, Bezzera, BFC, Brasilia, Carimali, Cimbali, Conti, Expobar, Elektra, Faema, Futurmat, Gaggia, Italcrem, Mairali, Marzocco, Nuova Simonelli, Pavoni, Promac, Rancilio, Reneka, Sab, San Marco, La Scala, La Spaziale, Unic, Victoria Arduino, VFA, Visacrem, Wega, Instanta, Marko, Lincat, Parry


The Services we carry out and what's included are listed below 

Front end service, Intermediate service and Pressure Testing on site

All other servicing at out workshop (you will need to deliver machine to us as due to regular commitments we are not able to collect)


Unfortunately we do not service domestic (home use) coffee makers.


FRONT END SERVICE  

Ta Moko Espresso advise front end servicing of your equipment every 12 months. This service consists of replacing:

Group Head Seals
Group Head Gaskets
Group Head Shower Plates
Back Flushing Of The Group Head Itself
Adjust Grinder / Reset Drink Settings If Necessary
Basic Retrain Of Staff If Required
Advise On General Condition Of The Machine And Parts & Recommend Future Replacements

INTERMEDIATE  MACHINE SERVICE 

Ta Moko Espresso advise this service is to be carried out at least every 18 - 24 months. Full Machine Servicing Includes:

Group Head Seals
Group Head Gaskets
Group Head Shower Plates
Adjust Grinder / Reset Drink Settings If Necessary
Back Flushing / Cleaning Of The Group Head Itself
Steam Arm Seals
Water Valve Seals
Minor Scale Removal & Clean Water Ports
Minor Scale Removal & Clean Internal Filters
Advise On Condition Of The Machine & Advise Of Any Issues With Parts & Recommend Future Replacements
Drink Settings Re-Calibration
Basic Re-train of Staff If Required


MAJOR SERVICE from 

Recommended for any machine never serviced, or left sometime between services, always recommended for second hand equipment, or older equipment.

This is done off site with and takes between (10-20 Days) as the machine is stripped back to parts de scaled cleaned and then reassembled

Boiler Inspection
Full Internal Descale - Including Boiler
Group Head Seals
Group Head Gaskets
Steam Arm Seals
Water Valve Seals
Group Head Shower Plates
Anti-Vac Valves
Back Flushing Of The Group Head Itself
Adjust Grinder / Reset Drink Settings If Necessary
Advise On Condition Of The Machine And Parts & Recommend Future Replacements
Scale Removal & Clean Water Ports
Scale Removal & Clean Internal Filters
Boiler Pressure Safety Valve (Certified)
Replace Worn Valve Rubbers
Drink Settings Re-Calibration 

BOILER SAFETY CHECK  

A boiler inspection is required on all appliance’s which produces steam in a commercial environment, this is part of the H.S.E’s pressure vessels act currently in force in the UK. This inspection, relating to the pressure test on the boiler, must be carried out every 12 months by a competent person and is an insurance requirement.

The Boiler Inspection and Pressure Test Report in relation to commercial espresso machines is becoming more commonly enforced by local authorities

All parts required for the servicing are included with the exception of any PCBs / Touchpads / Electrical water relays

From Beans to Machines and Everything in between 


​.Copyright © 2013 Ta Moko Espresso . All rights reserved.

Ta Moko Espresso